Pages

Sunday, June 23, 2013

CEP 800 Action Research


Angela Tashjian
CEP 800
Action Research
June 23, 2012
Geometer’s Sketchpad

I began this lesson by reviewing important vocabulary words that students need to know in order to complete this lesson. We reviewed parallel lines and transversals. When a transversal intersects a pair of parallel lines, they form angle pairs. We discussed alternate interior angles, same side interior angles, alternate exterior angles, and corresponding angles. There is a relationship between these angle pairs, and I explained to my students that they are going to use Geometer’s Sketchpad to discover the relationship.

I then opened up Geometer’s Sketchpad on my computer and projected it for students to see. I demonstrated basic functions in Geometer’s Sketchpad such as creating points, lines, and measuring angles. I then passed out the worksheet to students and they began to work individually at their computers. I walked around and answered student questions when they had them. Once students completed the worksheet, they discussed their findings as a group. 

Since the school year was over when I implemented my lesson, I recruited high school swimmers who I coached when I taught at Okemos High School last year and asked them if they would be willing to participate in my lesson. I was fortunate to find five students to work with to implement my lesson. We met at the high school for one hour and used a computer lab there. 

Overall, everything with the lesson went well. The students were thankful for the review at the beginning because it helped them to recall what they had learned this year and it gave them the prior knowledge necessary to complete the lesson. The majority of the questions that I answered while students were completing the worksheet were questions about how to perform certain operations in Sketchpad, there were no questions relating to the content. After each of the students completed the worksheet, they discussed their results and each student had discovered the same properties about angle pairs formed when a transversal intersects parallel lines.

The content that was covered in this lesson is typically presented to students as theorems. They are told which angle pairs are congruent and which ones are supplementary. They do not have to do any work on their own to discover this, they are simply presented with theorems stating these facts and then memorize the information. Geometer’s Sketchpad allows students to discover angle relationships and generate these theorems on their own. This is a big advantage of using Geometer’s Sketchpad for this lesson. Geometer’s Sketchpad allows students to be more involved and engaged in their learning and understanding of content.

I had anticipated that there would be a learning curve for students to overcome when using Geometer’s Sketchpad for the first time. I did the demonstration at the beginning of the lesson to help students with this learning curve. Three of the students were able to pick it up easily simply from my demonstration and playing around with the program themselves. While students were working on the worksheet, I spent most of my time with the two students who were not able to navigate through the program as well on their own at first.  They asked questions about how to create parallel lines and measure angles and I talked them through how to do it. Once they did it on their own and received reassurance from myself, they began to feel more comfortable with Geometer’s Sketchpad and continued through the rest of the worksheet on their own.

The students expressed to me at the end of the lesson that they liked using Geometer’s Sketchpad and would prefer completing lessons with this program as opposed to sitting through lectures. They enjoyed coming up with the theorems on their own through the use of technology. Based on my observations, the student’s discussion of their findings at the end helped the material really sink in and make sense. Talking about the content openly with their classmates made their findings legitimate and they were confident with what they had found. 

After reflecting on this lesson I have found that once students are able to perform functions on their own, Geometer’s Sketchpad is quite effective and also enjoyable. When I use this program in the future I will take a class period for students simply to play around with Geometer’s Sketchpad and learn how make constructions and perform necessary functions. I will create a lesson that will allow students to learn how to create and measure figures so that they can overcome the learning curve. Once this lesson is complete, I will be able to replace lessons that would typically be given as a lecture, such as the one I did for this project, with Geometer’s Sketchpad. Students will be comfortable with Geometer’s Sketchpad after the initial lesson and will be able to use it productively and effectively to discover geometric relationships on their own.

Sunday, June 16, 2013

CEP 800 Module 5 Lesson Plan

Learning Standards: G1.1.2 Solve multistep problems and construct proofs involving corresponding angles, alternate interior angles, alternate exterior angles, and same-side (consecutive) interior angles.

Essential Questions: Prior to this lesson, students must know and understand parallel lines and transversals. When a transversal crosses through two parallel lines, students must also know which pairs of angles are corresponding angles, alternate interior angles, same side interior angles, and alternate exterior angles.
The essential question that students will be able to answer after this lesson is: What is the relationship between corresponding angles, same side interior angles, alternate interior angles, and alternate exterior angles?
 
Technology and Materials Required: Each student will need a computer, a worksheet and a pencil.

The Lesson: You may click here to be taken to the worksheet that students will complete during this lesson. The lesson will play out as follows:

Introduction: The teacher will begin by reviewing the important geometry terms that they have learned so far in this class and that they will need to recall before this lesson.

Explanation: The teacher will pass out the worksheet and explain that they will be creating figures in geometry and taking measurements of those figures in a program called Geometer’s Sketchpad. The class will need to proceed to the computer lab.

Demonstration: The teacher will demonstrate for the students how to construct and measure basic geometric figures in Geometer’s Sketchpad.

Practice: The students will work through the worksheet and create the figures that are asked of them. As they take measurements they will make connections and discover properties regarding the angles formed when a transversal intersects parallel lines.

Feedback: Students will receive feedback from their teacher as the teacher walks around the room throughout the lesson to answer questions and give support to the students. S

Conclusion: The lesson will conclude with students sharing their discoveries in Geometer’s Sketchpad. The students will discuss all of the conjectures that they have made about geometrical relationships.

Questions:

1.     Content: My lesson is going to review the following state standard: G1.1.2 Solve multistep problems and construct proofs involving corresponding angles, alternate interior angles, alternate exterior angles, and same-side (consecutive) interior angles. Regardless of the topic covered in geometry, students tend to struggle because geometry is very visual and quite different from any other math class that they have taken. Students who are not visualize learns often have a difficult time comprehending geometry concepts.

One of these concepts that students struggle with are all of the different types of angles that are formed when two parallel lines are cut by a transversal. In addition to geometry being difficult for students depending on their learning style, students struggle with these concepts because there are a lot of new vocabulary words to learn, and properties that come along with these new vocabulary words. Students tend to memorize these concepts and do not perform well on assessments because memorization is not the best method to use in geometry. In my lesson, students will use Geometer’s Sketchpad to generate these properties on their own so that they can develop an understanding of these concepts without simply memorizing them.

2.     Pedagogy: The first pedagogical strategy that I will be using is Active Participation. Each student will have their own computer and will use Geometer’s Sketchpad to construct figures, measure angles and draw conclusions. The students will be actively participating because they will be engaged in their own explorations on their computer. Students learn better when they are actively involved with the content, as opposed to simply just listening to concepts being explained to them and memorizing facts.

The second pedagogical strategy that I will use is Cooperative Learning. After the students explore and discover concepts about parallel lines and transversal lines on their own they will meet in small groups and share their findings. They will discuss with their classmates what they discovered and why they believe their findings are true. In order to take different learning characteristics in account, using a combination of individual work time along with group work time will benefit the most students instead of sticking to one teaching strategy for an entire lesson.

3.     Content & Pedagogy: When it comes to teaching geometry, it is important for students to explore and draw conclusions on their own in order to gain a deep understanding of concepts. The Active Participation segment of this lesson allows students to do just this. It is also important for students to talk about what they found with other students. If students have reservations about their findings, talking them through and listening to what their classmates found can help students clear up their confusions and make sense of geometric facts. This is what the Cooperative Learning portion of the lesson allows students to accomplish.

4.     Technology: I will be using Geometer’s Sketchpad for my lesson. The use of this technology is not absolutely necessary to achieve my objective, it has often been taught without the use of Geometer’s Sketchpad. However, in my opinion, using Geometer’s Sketchpad is the best way to teach my lesson. There are two other ways that you could teach students about the angles formed from parallel lines and a transversal. The first is by taking notes on the material, which ultimately leads to students simply memorizing these facts.

The second way is by having students use a compass and a protractor to create their parallel lines, a transversal and measure angles. The reason that I prefer Geometer’s Sketchpad as opposed to constructions by hand is that it is not a simple task for students to use a compass to create two parallel lines. The task of doing this construction is tedious and takes away from the concepts that I want students to learn. Geometers Sketchpad is a tool that students can use to create all sorts of geometric objects with much more ease than using a compass and protractor. While using Geometers Sketchpad isn’t the only way to teach this lesson, I do believe that it is better than these two options that I have described.

5.     Technology & Pedagogy: As mentioned before, it is important for students to be individually engaged and active with the material they are learning so that they can gain an understanding of concepts for themselves. Geometer’s Sketchpad is a program designed for one person to use at a time. This technology truly allows for students to be actively engaged and working on their own, because only one person can control the mouse and make constructions in Geometer’s Sketchpad at a time.

The Cooperative Learning pedagogical strategy is not as involved with the technology as Active Participation is, however it is still involved in a way that is beneficial for students. Students will have conversations about their findings, and it is encouraged for students to demonstrate what they did for their peers in Geometer’s Sketchpad. While each student might not physically be using Geometer’s Sketchpad, they will observe their classmates and learn from what they did.  

6.     Technology & Content: Geometer’s Sketchpad allows students to be active with the content. They can create, measure and construct geometrical figures that will aid in their discovering of facts and properties used in geometry. Students can make mistakes that can easily be corrected, and they can construct with much greater ease than doing it by hand with a compass and protractor. Being active with the content in this way allows for a deeper understanding to be obtained, and ultimately student’s retention of facts is greater than if they simply memorized concepts.

7.     Assessment: Once students have explored and drawn conclusion about the angles formed when a transversal intersects two parallel lines in Geometer’s Sketchpad they will be assessed through quizzes and tests. There are many different types of problems that require students to have an understanding of these concepts in order to solve. If students solve problems correctly I will know that they have mastered the content. Geometer’s Sketchpad does the best job of helping students gain a deep understanding of the concepts covered in this lesson and also retaining that information.